loading

Specialized in Custom Led lighting wholesale Manufacturers since 2011.

Advantages and disadvantages led bulbs and energy-saving lamps

a. Advantages of energy-saving lamps:

incandescent light bulbs, energy-saving light energy conversion rate is much higher, save electricity, also can reduce the emissions of greenhouse gases, long service life.

2. Energy-saving lamps drawback:

1. Energy-saving lamps start slowly.

2。 Energy-saving lamp is open line spectrum, so usually purple light of energy-saving lamps, see things will badly discolored under the energy-saving lamps. Looks blue will be purple, red and yellow is more bright. So you should not use energy-saving lamps in the color of the workplace.

3。 Scientists through investigation and study for a long time to get a preliminary conclusion: energy-saving lamp radiation may pose a risk to human health, and even cause cancer.

the advantages and disadvantages of LED lights

a, the advantages of LED lights

1. High energy saving, energy saving energy is the environmental protection from pollution. Dc drive, ultra-low power electric power conversion is close to 100%, the same lighting effect than the traditional light source, energy saving more than 80%.

2。 Long life: LED light source has called it longevity light, meaning never extinguished the lights. Solid cold light source, the epoxy resin encapsulation, no loose parts in the body, there is no filament light easy to burn and thermal deposition, droop, such as faults, service life can reach 60000 to 100000 hours, long service life 10 times more than traditional light.

3。 Many changes: LED light source available red, green, blue three colors principle, in under the control of computer technology make the three colors gray level 256 and arbitrary mixed, can produce 256 & times; 256× 256 = 16777216 kinds of color, form different combinations of light color changing, realize the dynamic change of rich and colorful effects and all kinds of images.

4。 The environmental protection, environmental protection benefit is better, no ultraviolet and infrared spectrum, no heat, no radiation, glare small, and waste recoverable, no pollution contains no mercury elements, cold light source, can safely touch, belongs to typical green lighting source.

5。 High tip: compared with the traditional monotonous lighting effects, the LED light source is low pressure microelectronics products, successfully combines computer technology, network communication technology, image processing technology, embedded control technology, etc. , so also is the digital information technology products, is a semiconductor photoelectric device & other; High point & throughout; Technology, with online programming, unlimited upgrades, flexible characteristic.

leds faults:

1. LED lights can not completely replace incandescent lamp; Luminous flux, luminous efficacy and color rendering, but now it's too expensive and will not decline in recent years. But the luminous flux can improve the product so as to reduce the cost of replacing incandescent lamp.

2。 Leds shall simply use light source; It used to drive power supply, optical and thermal conduction.

3。 Leds also fever, need to heat dissipation.

GET IN TOUCH WITH Us
recommended articles
Info Center faq News
a good LED light emitting diode is 100000 hours, or more than 10 years, but because by various factors influence, currently on the market most of LED project-light lamp life spans, and can't arrived.
over time, led bulb light price will decline gradually, it will become the CFL cleaner, safer alternatives to has a longer service life and can be expected.
foshan surveying of land science and technology co.
according to the Australian news network reported, as a part of the urban infrastructure construction, improving the act (
ACT)

About 30% of the street lamp has been replaced with energy saving LED lights.
1, convenience
can directly replace the existing same E27, E14, GU10 and B22 interface of energy-saving lamps and bulbs products, usually don't have to do any change, don't need any technician or professionals, with detailed read let's use of instructions, DIY can easily implement from general lighting replacement LED lighting.
recently Taiwan taichung city council decision, after review the budget will delete 79 million LED the news of the subsidies caused much attention.
radar sensor LED bulb light metal case why not?
Now to explain for you!


a, principle limit
radar sensor LED bulb light is the doppler radar induction principle, can wear non-metallic objects, common board, gypsum board, glass can penetrate, radar sensor signal can penetrate through the wall, even invisible installation effect, but the metal objects can block radar signal, technical principle limit do not use a metal shell.
CFLS now has spread to every household, it not only bright, and the function of power saving.
at present, the business environment in Europe and the domestic market is likely to worsen the situation, the Middle East, South America, increasing demand for LED products in China may be the only bright spot LED domestic small and medium-sized enterprises.
Contact us
Hangzhou Sehon Technology Co., Ltd.
Copyright © 2026 Hangzhou Sehon Technology Co.,Ltd. |Sitemap
Product Lives
Customer service